[Open-FCoE] problem while using fcgw

Joe Eykholt jre at nuovasystems.com
Fri Sep 12 16:25:00 UTC 2008


manali baldawa wrote:
> I want to use fcgw
> I have setup *fcoe initiator  -> fcgw -> ( any fc simulator)*
> I have all hardware in place ....
> i used all configuration steps which are mentioned on open-fcoe-wiki......
> but i am not able to see luns on initiator side.
> I think either i missed out something on fcgw...
> 
> i used following steps to set up fcgw.
> 1.I have 2gbps atto card
> 2. downloaded tachynet driver from sourceforge.net(link provided on wiki
> page)
> 3. modprobe tachynet
> 4. ifconfig efc01
> 5.ifconfig eth1
> 6.fcgw -i eth0 -f efc0 -n &
>   gateway is running  now
> 
> 
> Target setup
> i have qlogic  and i am using scst .
> luns are created on target
> 
> Initiator setup
> I have new open-fcoe code
> loaded fcoe module
> 
> 1.modprobe fcoe
> 2.echo eth1 > /sys/module/fcoe/create
> 
> Could anyone please help me in this??
> is my setup is rite??
> am i missing any steps ??
> 
> I studied this using wireshark , initiator is sending FLOGI but i think
> gatways is not responsding to it and not even forwarding to target.
> 
> 
> Thanks & Regards

Try doing this in the shell (assuming bash) before running fcgw:
	export FCOE_OUI=0xefc00

Let me know if that doesnt' fix it.

	Joe



More information about the devel mailing list