[Open-FCoE] Actual data transfer (FCoE)
hansrajpict at gmail.com
Thu Jan 22 06:31:14 UTC 2009
Hi Deepak, Robert
I could later do mkfs and then mount the lun.
I could see them in fdisk -l.
"That was gr8."
I also tried creating files and writing to them.
didnt do far, as the Luns disappeared after some time.
Might be some issue with the Keep alives.
still trying to figure out.
Thanks & Regards,
On Wed, Jan 21, 2009 at 11:12 PM, Love, Robert W <robert.w.love at intel.com>wrote:
> hansraj Jadhav wrote:
> > Hi Joe,
> > Im creating LUNS on the target.
> > + This is the command i use:
> > *dd if=/dev/null of=/target/mydisk bs=1M count=100 2>/dev/null
> > echo "open mydisk /target/mydisk" > /proc/scsi_tgt/vdisk/vdisk
> > *+ It shows the size of mydisk as zero.
> > Name *Size(MB)* Block size Options File name
> > mydisk * 0 * 512
> > /target/mydisk
> > Is this the problem?
> > @Robert
> > The* fdisk -l* on the inititator shows only the physical disks
> > attached. It does not show any other disks.
> > I can see the Luns when i do a "cat /proc/scsi/scsi" &
> > I can also see new devices if i do " ls /dev/s* ".
> AFAIK you should always see all of your storage in the fdisk output.
> I know that I always see my FCoE attached LUNs with it.
> For your question from another mail if you're looking to do file
> operations on the disk you'll need to format it (mkfs) and then
> mount it (mount).
!!! Never Say Die !!!
More information about the devel